Timecode-to-seconds converter

Tool

Run the tool

Add your inputs below and Ubetoo will return the result, output, or generated file in the result panel.

Broadcast cue at 24 fps Short clip at 30 fps One-minute mark

Result

45 seconds

00:00:45:00 at 30 fps equals 45 seconds.

Total seconds 45

Approximate frame count 1,350

Normalized timecode 00:00:45:00

Frame rate 30 fps

Hours / minutes / seconds / frames 0 / 0 / 45 / 0

How to use this tool well

You can use HH:MM:SS:FF, MM:SS:FF, or MM:SS depending on how detailed your source timing is.
The frame count readout is useful when you need to compare the same timing at a given frame rate.

Quick examples

00:03:15:12 at 24 fps -> 195.5 seconds
01:02 at 30 fps -> 62 seconds

Related tools

Frequently asked questions

What is the timecode-to-seconds converter built for?

Convert a timecode back into seconds when you need offsets, durations, or timing math for production notes.

Should I upload files or use manual entry in the timecode-to-seconds converter?

The timecode-to-seconds converter is designed around a direct form workflow, so the fastest path is to fill in the required inputs and run it.

Which inputs matter most on the timecode-to-seconds converter page?

This page is driven mainly by uploads or imported files, so the important preparation is having the right source material ready.

What file types or import layouts does the timecode-to-seconds converter accept?

This tool does not depend on uploads or import files. Enter the values directly in the form fields shown on the page.

What will the timecode-to-seconds converter return after I run it?

The result panel leads with the main answer, then adds supporting metrics, notes, or formatted output blocks so you can use the result immediately. It returns the answer directly in the page, so you can adjust the inputs and rerun the tool quickly.

How do I get the best result from the timecode-to-seconds converter?

You can use HH:MM:SS:FF, MM:SS:FF, or MM:SS depending on how detailed your source timing is. The frame count readout is useful when you need to compare the same timing at a given frame rate. Typical use cases include 00:03:15:12 at 24 fps -> 195.5 seconds; 01:02 at 30 fps -> 62 seconds.